2014 Dodge Durango Owner Manual - Page 23

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 2. Perform one of the following methods to lock the vehicle: • Push LOCK on the interior power door lock switch with the driver and/or passenger door open. • Push the LOCK button on the exterior Passive Entry Door Handle with a valid Key Fob available in the same exterior zone (refer to ЉKeyless Enter-N-Go™Љ in ЉThings To Know Before Starting Your VehicleЉ for further information). • Push the LOCK button on the Remote Keyless Entry (RKE) transmitter. To Disarm The System The Vehicle Security Alarm can be disarmed using any of the following methods: • Push the UNLOCK button on the Remote Keyless Entry (RKE) transmitter. • Grasp the Passive Entry Unlock Door Handle (if equipped, refer to ЉKeyless Enter-N-Go™Љ in ЉThings To Know Before Starting Your VehicleЉ for further information). 2 • Cycle the vehicle ignition system out of the OFF position. • For vehicles equipped with Keyless Enter-N-Go™, 3. If any doors are open, close them. push the Keyless Enter-N-Go™ Start/Stop button (requires at least one valid Key Fob in the vehicle). Rearming The System • For vehicles not equipped with Keyless Enter-NIf something triggers the alarm, and no action is taken to Go™, insert a valid key into the ignition switch and disarm it, the Vehicle Security Alarm will turn off the turn the key to the ON position. horn after three minutes, turn off all of the visual signals after 15 minutes, and then the Vehicle Security Alarm will rearm itself.