2015 Dodge Charger User Guide - Page 31

GETTING STARTED Power Lumbar • Push the switch forward to increase the lumbar support. Push the switch rearward to decrease the lumbar support. • Pushing upward or downward on the switch will raise and lower the position of the support. Memory Seat The memory seat feature allows you to set two different driver seating positions (excluding lumbar position), outside mirrors, radio station preset settings and tilt/ telescoping steering column position (if equipped). The memory seat buttons are located on the driver's door panel. To set a memory position: 1. Cycle the vehicles ignition to the ON position. 2. Adjust all memory profile settings. 3. Press and release the S (SET) button. 4. Press and release the 1 or 2 button within five seconds. NOTE: Before programming your RKE transmitters you must select the feature through the Uconnect® system. Refer to "Uconnect® Settings " in "Understanding Your Instrument Panel" in the Owner's Manual on the DVD for further details. To program a Key Fob to the memory position: 1. Cycle the vehicles ignition to the OFF position. 2. Select the desired memory profile 1 or 2. 3. Press and release the S (SET) button on the memory switch, then within five seconds press and release the 1 or 2 button accordingly. 4. Press and release the LOCK button on the RKE transmitter within 10 seconds. • To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the programmed RKE transmitter. Power Lumbar Switch Driver's Memory Buttons 29