2001 Ducati Superbike 748 R Owners Manual - Page 97

DIRECTIONS FOR USE Running-in recommendations Max. rotation speed (fig. 20) Rotation speed for running-in period and during standard use (rpm): 1) up to 1000 km; 2) from 1000 to 2500 km; 3) after 2500 km. Up to 1000 km During the first 1000 km, keep an eye on the revolution meter. The indicator must not exceed: 6500-7000 rpm. During the first hours of riding, it is advisable to run the engine at varying load and rpm, though still within recommended limit. To this end, roads with plenty of bends and even slightly hilly areas are ideal for a most efficient running-in of engine, brakes and suspensions. For the first 100 km, use the brakes gently. Do not brake violently or keep brake applied for too long. This will enable a correct break-in of friction material on brake pads against brake discs. For all mechanical moving parts of the motorcycle to adapt to one another and above all not to adversely affect the life of basic engine parts, it is advisable to avoid harsh accelerations and not to run the engine at high rpm for too long, especially uphill. Furthermore, the drive chain should be inspected frequently. Lubricate and tighten it as required. From 1000 to 2500 km At this point, you can squeeze some more power out of your engine, being careful, however, never exceed: 9000 rpm until covering the running-in distance (2500 km). Following these recommendations strictly, will extend the life of your engine and reduce the likelihood of overhauls or tune-ups. E fig. 20 29