1997 Ford Aerostar Owner's Manual - Page 48

NOTE: On the High-Level Audio System, the clock can be set with the radio power on or off. Tape error messages Your cassette tape player is equipped to diagnose certain problems you may experience. Error codes are as follows: Error 0 - Communication error between the radio controller and the tape controller. The cassette player will eject the tape. Insert the tape again. If the same error code appears, turn the ignition off, then back on again and insert the tape. Error 1 - Possible problem cartridge. The cassette tape player will eject the tape. Insert the tape again. If the same error code appears in the display, try a different cartridge. Error 2 - Tape eject or load failure. Your cassette tape player will go into the pause mode. Push "EJCT" to eject the tape. If the tape doesn't eject, refer the problem to qualified personnel for service. Tips on Caring for the Cassette Player and Tapes In order to keep your cassette tape player performing the way it was meant to, read and follow these simple precautions: u Using a Ford or equivalent cassette cleaning cartridge to clean the tape player head after 10-12 hours of play will help maintain the best playback sound and proper tape operation. less should be used. Tapes longer than 90 minutes are thinner and subject to breakage or may jam the tape player mechanism. 45 u Only cassettes that are 90 minutes long or