1997 Ford Ranger Owner Guide 1st Printing - Page 234

Roadside Emergencies WARNING Use only the lug nut wrench provided to remove wheel ornaments. Not using the tapered end of the lug nut wrench at the pry-off notches may result in damage to the finish of the wheel and ornament. 4. Loosen the wheel nuts by pulling up on the handle of the lug nut wrench about one-half turn (counterclockwise). Do not remove the wheel lug nuts until you raise the tire off the ground. 5. Insert the jack handle into the jack and use the handle to slide the jack under the vehicle. WARNING To avoid injury, never run the engine with one wheel off the ground, such as when changing a tire. Removing and Replacing the Tire 1. Positioning the jack a. To raise a front wheel, place the jack directly under the shock absorber so that it contacts the bottom of the shock. b. To raise a rear tire, place the jack under the rear axle between the spring shackle bolts. 233