1998 Ford F250 Owner's Manual - Page 142
1998 Ford F250 Manual
Page 142 highlights
Roadside emergencies If your vehicle is equipped with 4WD or AWD, a spare tire of a different size than the road tires should not be used. Such a tire could result in damage to driveline components and make the vehicle difficult to control. Location of the spare tire and tools The spare tire and tools for your vehicle are stowed in the following locations: Tool Spare tire Jack, lug nut wrench Jack handle Location Under the vehicle, just forward of the rear bumper Under the seat On top of the radiator support at the front of the engine compartment Removing the spare tire 1. Insert the jack handle into the rear bumper opening. The handle will stop moving and forward resistance to turning will be felt when properly engaged. 2. Turn the handle counterclockwise until tire is lowered to the ground, the tire can be slid rearward and the cable is slightly slack. 3. Remove the retainer from the spare tire. Stowing the spare 1. Lay the tire on the ground with the valve stem facing up. 142