1999 Ford Crown Victoria Owner's Manual - Page 83
1999 Ford Crown Victoria Manual
Page 83 highlights
Controls and features 1. Enter the keyless entry keypad factory-set code. 1 2 3 4 5 6 7 8 9 0 2. Within 5 seconds press and hold 7/8 control. 3. Within 5 seconds with 7/8 held down, press and release 1/2 control. 4. Release 7/8 control. The doors will lock/unlock to confirm successful programming. Autolock (if equipped) This feature automatically locks all doors when: • all vehicle doors are closed • the ignition is in the ON position • you shift into R (Reverse) or D (Drive). Relock The autolock feature repeats when: • any door is opened and closed Deactivating/activating the autolock feature Before following the procedure, make sure that the ignition is OFF and all vehicle doors are closed. Automatic door locks can be turned on/off with the keyless entry keypad through the following procedure: You must complete steps 1-5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Enter the keyless entry keypad factory code. 2. Within 5 seconds, press and hold control 7/8. 3. Within 5 seconds (while holding down control 7/8), press and release control 3/4. 4. Release control 7/8. The door will lock/unlock to confirm the feature has been disabled. Once disabled, the feature can be enabled by repeating the same sequence. Automatic door locks can also be turned on/off through the following procedure: 83