1999 Ford Explorer Owner Guide 1st Printing - Page 92

Controls and features Compass calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines: • Press and hold the MODE control until CAL appears in the display (approximately eight seconds) and release. • Drive the vehicle slowly (less than 5 km/h [3 mph]) in circles until CAL indicator turns off in about 2-3 complete circles. LAMP MODE LAMP CAL HOMELINKா UNIVERSAL TRANSCEIVER WITH TRAVELNOTEா (IF EQUIPPED) The HomeLink௡ Universal Transceiver, located on the driver's visor, provides a convenient way to replace up to three hand-held transmitters with a single built-in device. This feature will learn the radio frequency codes of most current transmitters to operate garage doors, entry gates, security systems, entry door locks, and home or office lighting. When programming your HomeLink௡ Universal Transceiver, to a garage door or gate be sure that people and objects are out of the way to prevent potential harm or damage. Do not use the HomeLink௡ Universal Transceiver with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door which cannot detect an object, signaling the door to stop and reverse, does not meet current U.S. federal safety standards. For more information on this matter, call toll-free: 1-800-355-3515 or on the Internet at HomeLink.jci.com. 92