1999 Ford Windstar Owner Guide 1st Printing - Page 22
1999 Ford Windstar Manual
Page 22 highlights
Instrumentation Compass zone/calibration adjustment Perform this adjustment in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 1. Turn ignition to the ON position. 2. Start the engine. 3. Determine your magnetic zone by referring to the zone map. 4. From Info menu, select the 1 Compass/Outside Temperature 15 function. 2 14 3 13 4 12 5 6 7 8 9 10 11 5. Press and hold the RESET control until the message center display changes to show the current zone setting. 6. Release the reset control, then slowly press down again. 7. Press the SETUP control repeatedly until the correct zone setting for your geographic location is displayed on the message center. To exit the zone setting mode press and release the RESET control. 8. Press the RESET control to start the compass calibration function. 22