2000 Ford Crown Victoria Owner's Manual - Page 201
2000 Ford Crown Victoria Manual
Page 201 highlights
Capacities and specifications Ensure the correct automatic transmission fluid is used. MERCON and MERCON V are not interchangeable. DO NOT MIX MERCON and MERCON V. Refer to the Scheduled Maintenance Guide to determine the correct service interval. 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Police Package refill capacity-12.1L (12.8 quarts). 4 Use Ford Premium Engine Coolant (green in color). DO NOT USE Ford Extended Life Engine Coolant (orange in color). Refer to Adding engine coolant, in the Maintenance and Care chapter. 5 Rear axles are considered lubricated for life when the vehicle is used for normal service. See your Scheduled Maintenance Guide for Severe Duty requirements. Traction-Lok axles use 1.6-1.8L (3.50-3.75 pints) of rear axle lubricant. Add 118 ml (4 oz.) of Additive Friction Modifier C8AZ-19B546-A or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axle. Service refill capacities are determined by filling the rear axle 6 mm to 14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole. LUBRICANT SPECIFICATIONS Item Brake fluid Ford part name High Performance DOT 3 Motor Vehicle Brake Fluid 1 Silicone Lubricant Ford Premium Engine Coolant Ford part number C6AZ-19542-AB Ford specification ESA-M6C25-A and DOT 3 2 Door weatherstrips Engine coolant F7AZ-19G208-BA ESR-M13P4-A and F5AZ-19553-AA E2FZ-19549-AA ESE-M97B44-A (in Canada, Motorcraft CXC-8-B) 201