2000 Ford F150 Owner's Manual - Page 82

Controls and features TAILGATE REMOVAL Your tailgate is removable to allow more room for loading. 1. Lower the tailgate. 2. Use a screwdriver to pry the spring clip (on each connector) past the head of the support screw. Disconnect cable. 3. Disconnect the other cable. 4. Lift tailgate to a 45 degree angle. 5. Lift right side off of its hinge. 6. Lift left side off of its hinge. To install, follow the removal procedures in reverse order. TONNEAU COVER (IF EQUIPPED) The tonneau cover has been designed to maximize fuel economy and should be fully installed whenever possible. The cover can be rolled up and stowed behind the cab, or removed completely from the vehicle. • To avoid damage to the cover, do not operate the vehicle unless the cover is fully installed, or securely stowed. Refer to Tonneau cover care in the Maintenance and care chapter. The removal and stowage for styleside and flareside vehicles are basically the same except where noted. To remove or stow the cover: 1. Styleside only: In cold weather lower tailgate and release the levers on each side of the rear rail to release tension on the cover. 2. Pull the rear corner assist loops of the cover, outward, then upward to release the tension. Lift up on the rear edge of the cover to remove it from the rear rail. 82