2001 Ford Crown Victoria Owner's Manual - Page 91

Controls and features 7. After a five to ten second delay, the door locks will cycle lock/unlock to confirm successful programming. 8. Turn the ignition to OFF. This feature can also be turned on/off through the following 1 2 3 4 5 6 7 8 9 0 procedure using the keyless entry keypad. 1. Enter the keyless entry keypad factory-set code. 2. Within 5 seconds press and hold 7/8 control. 3. Within 5 seconds with 7/8 held down, press and release 1/2 control. 4. Release 7/8 control. The doors will lock/unlock to confirm successful programming. Autolock (if equipped) This feature automatically locks all vehicle doors when: • all doors are closed • the ignition is in the ON position and • you shift into any gear. Relock The autolock feature repeats when: • any door, except the drivers, is opened then closed while the engine is running and • you put the vehicle in motion. Deactivating/activating the autolock feature Before following the procedure, make sure that the ignition is OFF and all vehicle doors are closed. Automatic door locks can be turned on/off with the keyless entry keypad through the following procedure: You must complete steps 1-5 within 30 seconds or the procedure will have to be repeated. If the procedure needs to be repeated, you must wait 30 seconds. 1. Enter the keyless entry keypad factory code. 2. Within 5 seconds, press and hold control 7/8. 91