2001 Ford Focus Owner Guide 4th Printing - Page 74
2001 Ford Focus Manual
Page 74 highlights
Controls and features 2. Turn the ignition lock from OFF (2) to ON/RUN (3) at least 4 times in 6 seconds. 3. Switch off the ignition. Now the control module has entered the learning mode" for 10 seconds. This mode is indicated by a chime. 4. While the control module is in the learning mode", press and hold one of the buttons of the remote transmitter until a chime sounds. This indicates a new transmitter code has been successfully received. After each successful programming, another 10 second learning mode" is automatically entered, up to a maximum of four times. Another transmitter can now be programmed (repeat step 4). 5. The system will leave the learning mode" after starting the ignition, if no new transmitter is programmed during the 10 seconds, or if 4 remotes have been programmed. After successful programming, only the new programmed transmitters will be accepted. Note that an incorrect programming procedure does not affect the stored codes. 6. After programming, the system can be checked by activating/ deactivating the remote locking functions. 1 74