2003 Ford Crown Victoria Owner's Manual - Page 68
2003 Ford Crown Victoria Manual
Page 68 highlights
Driver Controls 4. Repeatedly press and release the RESET button to scroll through the zones 1-15 until the desired zone is 3 2 1 15 displayed. 4 14 5. Press the MODE button to save 13 the new zone setting and return to 5 the compass normal mode. 12 Note: The compass exits the zone setting mode and returns to its 6 7 8 9 1011 previous setting after one minute of no activity. Note: If power is interrupted during the zone setting process, the compass resets to the same zone it was set to before the zone change process was started. Calibration mode To calibrate the compass: 1. Press and release the MODE button until the compass directional heading is displayed. 2. Hold down the MODE button for 10 seconds to enter the calibration mode. The display will read PRESS RESET TO DECAL. 3. Release the MODE button. 4. Press the RESET button to de-calibrate the compass. The display will read CIRCLE SLOWLY TO CALIBRATE for a few seconds and then display a direction with CAL displayed on the right side. 5. Slowly drive the vehicle in a circle (less than 5 km/h [3 mph]). This will take up to three circles to complete calibration. 68 2003 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA English (fus)