2003 Ford Crown Victoria Owner's Manual - Page 69
2003 Ford Crown Victoria Manual
Page 69 highlights
Driver Controls 6. The correct compass heading will be displayed when the compass is calibrated. Note: If the RESET button is not pressed, the compass will exit calibration mode after three minutes of no activity and the original calibration data will be restored. Note: If power is interrupted during the calibration process, the compass resets to the original calibration data from before the calibration process started. HomeLink mode Train mode Note: Do not train the HomeLink with the vehicle parked in the garage. To train a HomeLink button to control a specific device: 1. Select the HomeLink button to train. 2. Press and continuously hold the button for 20 seconds. CHANNEL X TRANSMIT will be displayed (X will be 1, 2, or 3) during this time. Note: If more than one button is pressed, priority will be given to the lowest numbered channel. 3. After 20 seconds, the display will read CHANNEL X TRANING to indicate training has started. Continue to hold the button. Note: If the channel being trained has not been previously trained, the channel will immediately enter the training mode (no 20 second delay). 4. Point the original garage door opener/transmitter at the overhead console. Hold down the original transmitter's button so the overhead console can learn the transmitter's frequency and data stream. 69 2003 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA English (fus)