2003 Ford Thunderbird Owner Guide 2nd Printing - Page 185
2003 Ford Thunderbird Manual
Page 185 highlights
Maintenance and Specifications Fluid Windshield washer fluid Ford Part Name Motorcraft Premium Windshield Washer Concentrate Application All Capacity Fill to line on reservoir Use only brake fluids certified to meet Ford specifications. Refer to Lubricant Specifications in this chapter. DOT 3 fluid is recommended. However, if DOT 3 is not available, DOT 4 fluid can be used. 2 3 1 Add the coolant type originally equipped in your vehicle. Your vehicle's rear axle is filled with a synthetic rear axle lubricant and is considered lubricated for life. These lubricants do not need to be checked or changed unless a leak is suspected, service is required or the axle assembly has been submerged in water. The axle lubricant should be changed any time the rear axle has been submerged in water. Fill 6 mm to 14 mm (1/4 inch to 9/16 inch) below bottom of fill hole. Ensure the correct automatic transmission fluid is used. MERCON and MERCON V are not interchangeable. DO NOT MIX MERCON and MERCON V. Refer to the scheduled maintenance guide to determine the correct service interval. 4 Approximate dry capacity, includes cooler and tubes. Fluid level should be checked by a qualified service technician. Use of sythetic or sythetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C153-H and the API Certification mark. 6 5 185 2003 Thunderbird (tbr) Owners Guide (post-2002-fmt) USA English (fus)