2004 Ford Crown Victoria Owner's Manual - Page 228

Maintenance and Specifications Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Police or Handling Package refill capacity-12.1L (12.8 quarts). 4 5 3 Add the coolant type originally equipped in your vehicle. Rear axles are considered lubricated for life when the vehicle is used for normal service. See your Scheduled Maintenace Guide for Severe Duty requirements. Traction-Lok axles use 2.1-2.3L (4.50-4.75 pints) of rear axle lubricant. Add 118 ml (4 oz.) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok rear axle. Service refill capacities are determined by filling the rear axle 6 mm to 14 mm (1/4 inch to 9/16 inch) below the bottom of the filler hole. 6 Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C153-H and the API Certification mark. LUBRICANT SPECIFICATIONS Item Brake fluid Ford part name Motorcraft High Performance DOT 3 Motor Vehicle Brake Fluid 1 Silicone Lubricant Motorcraft Premium Gold Engine Coolant (yellow-colored) Ford part number PM-1 Ford specification ESA-M6C25-A and DOT 3 Door weatherstrips Engine coolant XL-6 VC-7-A (U.S., except CA and OR), VC-7-B (CA and OR only) ESR-M13P4-A WSSM97B51-A1 228 2004 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA English (fus)