2005 Ford F350 Owner Guide 3rd Printing - Page 273

Maintenance and Specifications engine must warm up to its normal operating temperature. Once started, do not turn off the engine until the above driving cycle is complete. CHECKING AND ADDING POWER STEERING FLUID Check the power steering fluid. Refer to the scheduled maintenance guide for the service interval schedules. If adding fluid is necessary, use only MERCON௡ ATF. Check the fluid level when it is at ambient temperature, 20° - 80° F (-7° - 25° C): 1. Check the fluid level on the dipstick. It should be between the arrows in the FULL COLD range. Do not add fluid if the level is within this range. 2. If the fluid level is low. Add fluid to bring fluid level up to be between the arrows in the FULL COLD range. 3. Start the engine. 4. While the engine idles, turn the steering wheel left and right several times. 5. Turn the engine off. 6. Recheck the fluid level on the dipstick. Do not add fluid if the level is between the arrows in the FULL COLD range. 7. If the fluid is low, add fluid in small amounts, continuously checking the level until it reaches the FULL COLD range. Be sure to put the dipstick back in the reservoir. 273 2005 F250/350/450/550 (f23) Owners Guide (post-2002-fmt) USA_English (fus)