2007 Ford Explorer Sport Trac Owner Guide 4th Printing (Spanish) - Page 553

Seating and Safety Restraints • Grasp the shoulder portion and pull downward until the entire belt is pulled out. • Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and activate the vehicle sensitive mode. After any vehicle collision, the combination lap and shoulder belt system at all passenger seating positions must be checked by an authorized dealer to verify that the "automatic locking retractor" feature for child seats is still functioning properly, in addition to other checks for proper safety belt system function. BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if the safety belt assembly "automatic locking retractor" feature or any other safety belt function is not operating properly. In addition, all safety belts should be checked for proper function. Failure to replace the belt and retractor assembly could increase the risk of injury in collisions. Safety belt pretensioner Your vehicle is equipped with safety belt pretensioners at the driver and right front passenger seating positions. The safety belt pretensioner tightens the safety belts firmly against the occupant's body at the start of the crash. When the optional Safety Canopy௢ system, seat-mounted side airbags, and/or the front airbags are activated, the safety belt pretensioners for 163 2007 07+ Explorer Sport Trac (esp) Owners Guide (post-2002-fmt) USA (fus)