2007 Ford Focus Owner Guide 4th Printing - Page 218

2007 Ford Focus Manual

Page 218 highlights

218 Item Cooling system stop leak pellets - Fill to between MIN and MAX lines on reservoir Motorcraft MERCON௡ ATF XT-2-QDX / MERCON௡ ZC-32-A / WSB-M8B16-A2 - Motorcraft Premium Windshield Washer Concentrate - 5.1 quarts (4.8L) 14.0 gallons (53.0L) Power steering fluid Capacity Ford Part Name or Equivalent Motorcraft Cooling System Stop Leak Pellets Ford Part Number / Ford Specification VC-6 / WSS-M99B37-B6 Windshield washer fluid Fuel tank 1 2007 Focus (foc) Owners Guide (post-2002-fmt) USA (fus) Maintenance and Specifications Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities will vary based on vehicle application and transmission fluid cooling system (i.e. coolers size, cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. The manual transmission service refill capacity is determined by filling the transaxle to the bottom of the filler hole with the vehicle on a level surface. Automatic transmissions that require MERCON௡ V should only use MERCON௡ V fluid or fluid that is specified dual usage MERCON௡/ MERCON௡ V. Refer to scheduled maintenance to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 2 Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 4 3 Add the coolant type originally equipped in your vehicle.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232

Item
Capacity
Ford Part Name or
Equivalent
Ford Part Number /
Ford Specification
Cooling system stop
leak pellets
Motorcraft Cooling
System Stop Leak Pellets
VC-6 /
WSS-M99B37-B6
Power steering fluid
Fill to between
MIN and MAX
lines on reservoir
Motorcraft MERCON
±
ATF
XT-2-QDX /
MERCON
±
Windshield washer fluid
5.1 quarts (4.8L)
Motorcraft Premium
Windshield Washer
Concentrate
ZC-32-A /
WSB-M8B16-A2
Fuel tank
14.0 gallons
(53.0L)
1
Approximate dry fill capacity including transmission fluid cooling system, actual refill capacities
will vary based on vehicle application and transmission fluid cooling system (i.e. coolers size,
cooling lines, auxiliary cooler capacities). The amount of transmission fluid and fluid level should
be set by the indication on the dipstick’s normal operating range.
The manual transmission service refill capacity is determined by filling the transaxle to the bottom
of the filler hole with the vehicle on a level surface.
2
Automatic transmissions that require MERCON
±
V should only use MERCON
±
V fluid or fluid that
is specified dual usage MERCON
±
/ MERCON
±
V. Refer to
scheduled maintenance
to determine
the correct service interval. Use of any fluid other than the recommended fluid may cause
transmission damage.
3
Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the
requirements of Ford specification WSS-M2C930-A and the API Certification mark.
4
Add the coolant type originally equipped in your vehicle.
2007 Focus
(foc)
Owners Guide (post-2002-fmt)
USA
(fus)
Maintenance and Specifications
218