2007 Ford Freestar Owner Guide 2nd Printing - Page 107

Locks and Security KEYLESS ENTRY SYSTEM (IF EQUIPPED) You can use the keyless entry keypad to: lock or unlock the doors without using a key. activate or deactivate the autolock feature. open and close the right and left power sliding doors (if equipped). recall memory seat/side view mirrors/adjustable pedals position Driver 1 or Driver 2 (if equipped). The keypad can be operated with the factory set 5-digit entry code; this code is located: • on the owner's wallet card in the glove box, • marked on the passenger compartment fuse panel (located below and to the left of the steering, near the brake pedal), • and is available from your authorized dealer. You can also create your own 5-digit personal entry code. When pressing the controls on the keypad, press the middle of the controls to ensure a good activation. Programming a personal entry code To create your own personal entry code(s): 1. Enter the factory set code. Note: The driver's door will unlock. 2. Within five seconds press and release the 1 • 2 on the keypad. Note: The lock motors will cycle, locked then unlocked. 3. Enter your personal 5-digit code. Each number must be entered within five seconds of each other. 4. Enter a sixth digit if you wish to have the personal entry code recall memory position Driver 1 or Driver 2 (if equipped with the memory seat/side view mirrors/adjustable pedals feature). Note: The lock motors will cycle, locked then unlocked. 107 2007 Freestar (win) Owners Guide (post-2002-fmt) USA (fus)