2008 Ford Crown Victoria Owner's Manual - Page 45

Lights Overhead console lamps To remove and replace the lamps in the overhead console: 1. Make sure the headlamp switch is in the OFF position and remove the overhead console from the headliner by pulling it straight down. 2. Remove the bulb socket from the back of the lamp housing by pulling it straight out. 3. Remove the bulb from the socket by pulling straight out. Install the new bulb in reverse order. Replacing exterior bulbs Check the operation of all the bulbs frequently. Replacing headlamp bulbs To remove the headlamp bulb: 1. Make sure headlamp switch is in OFF position, then open the hood. 2. Remove the radiator cover by turning the three knobs to the unlock position. 3. Remove two retainers and pull headlamp assembly forward to expose bulb. 4. Disconnect the electrical connector from the bulb by pulling rearward. 45 2008 Crown Victoria (cro) Owners Guide (post-2002-fmt) USA (fus)