2008 Ford Explorer Owner Guide 3rd Printing - Page 126

Driver Controls Compass zone adjustment (if equipped) 1. Determine which magnetic zone you are in for your geographic location by referring to the zone 3 2 map. 4 2. Turn ignition to the ON position. 5 1 15 14 13 12 6 7 8 9 1011 3. Locate the reset button on top of the compass sensor mounted behind the mirror. 4. Press and hold the reset button on the compass module for approximately 4 seconds until COMPASS ZONE XX appears in the message center display. 5. Continue to press the reset button until the correct zone appears in the message center display. 6. After 4 seconds ZONE XX IS SET will appear in the message center display. 7. The display will return to normal operation. The zone is now updated. Compass calibration adjustment Perform compass calibration in an open area free from steel structures and high voltage lines. For optimum calibration, turn off all electrical accessories (heater/air conditioning, wipers, etc.) and make sure all vehicle doors are shut. 126