2008 Ford F250 Diesel Supplement 4th Printing - Page 82
2008 Ford F250 Manual
Page 82 highlights
Scheduled Maintenance: F-Super Duty 40,000 miles (64,000 km) ❑ Change engine oil and replace oil filter ❑ Rotate tires, inspect tires for wear and measure tread depth and inspect wheels for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Replace engine- and frame-mounted fuel filters Inspect steering linkage, suspension, driveshaft, ball joints and U-joints Inspect engine and fuel cooling systems and hoses Inspect brake pads/shoes/rotors/drums, brakes lines & hoses, and parking brake system Inspect exhaust system and heat shields Inspect and lubricate ball joints and tie rod ends (if equipped with zerk fittings) Inspect and lubricate front axle U-joints (4x4 vehicles) Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 50,000 miles (80,000 km) Change engine oil and replace oil filter Rotate tires, inspect tires for wear and measure tread depth and inspect wheels for endplay and noise (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect air filter restriction gauge, replace filter as required Change rear axle fluid (DANA axles only. Refer to Special Operating Conditions for more information) Inspect and lubricate ball joints and tie rod ends (if equipped with zerk fittings) Perform multi-point inspection (recommended) DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 82