2008 Ford F250 Owner Guide 4th Printing - Page 386

386 Item Windshield washer fluid Add 8 oz. (236 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A for complete refill of limited slip Ford axles. Ford design rear axles contain a synthetic lubricant that does not require changing unless the axle has been submerged in water. 2 1 Capacity 3.5 quarts (3.3L) Motorcraft Premium Windshield Washer Concentrate ZC-32-A / WSB-M8B16-A2 Ford part name Ford part number / Ford specification Add the coolant type originally equipped in your vehicle. 2008 F-250/350/450/550 (f23) Owners Guide (post-2002-fmt) USA (fus) Ensure the correct automatic transmission fluid is used. Transmission fluid requirements are indicated on the dipstick blade or the dipstick handle. Check the container to verify the fluid being added is of the correct type. Refer to your scheduled maintenance information to determine the correct service interval. Automatic transmissions that require MERCON௡ SP should only use MERCON௡ SP fluid. Use of a dual usage fluid in an automatic transmission requiring MERCON௡ SP may cause transmission damage. Use of any fluid other than the recommended fluid may cause transmission damage. 4 Service refill capacity is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. The 6-speed manual transmission is equipped with an in-tank cooler. Verify the fluid level after operating vehicle to ensure correct fluid level. 5 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Maintenance and Specifications 3 Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only meet the requirements of Ford specification WSS-M2C930-A and the API Certification mark. 6