2008 Ford F250 Special Off-Road Package Supplement 1st Printing - Page 11
2008 Ford F250 Manual
Page 11 highlights
Driver Controls 3. Free the winch hook from its anchor point and attach the hook strap to the hook (if not already attached). Always keep hands and clothing clear of the wire rope, hook and fairlead opening during operation and when spooling. 4. Pull the wire rope to the anchor point. Be sure to keep a certain amount of tension in the rope; when slackened, it can become twisted and overwrap leading to rope damage. Note: Never winch when there are less than five wraps of wire rope around the drum. 5. Secure the rope to the anchor point. (See Choosing an anchor point earlier in ths chapter. 6. Attach the clevis/D-shackle to the two ends of the strap or chain and through the hook loop. Be careful not to overtighten (tighten, then back-off 1⁄2 turn). 7. Lock (Engage) the clutch using the lever on the winch. 11 2008 F-250/350/450/550 (f23) Supplement USA (fus)