2008 Ford Taurus Scheduled Maintenance Guide 3rd Printing - Page 24

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 105,000 miles Change engine oil and replace oil filter Change manual transmission fluid (except Escape) Replace cabin air filter (if equipped) Replace PCV valve on all light trucks under 6,000 lbs. Gross Vehicle Weight (GVW) (except 3V engines) Change rear axle fluid only on vehicles equipped with DANA axles which use synthetic lubricant (see Special Operating Conditions on page 42 and Exceptions on page 47) Change Motorcraft Premium Gold Engine Coolant (see Exceptions on page 47 and Premium Gold Coolant Change Record on page 48) Inspect steering linkage, suspension and, if equipped, driveshaft, ball joints and U-joints Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) RO#: Inspect exhaust system and heat shields DATE: Inspect engine air filter Inspect automatic transmission fluid level (if equipped with an underhood dipstick) Lubricate ball joints and U-joints (if equipped with zerk fittings) Inspect and lubricate 4x4 front axle U-joints Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise DEALER VALIDATION: P&A CODE: MILEAGE: 112,500 miles ❑ Change engine oil and replace oil filter ❑ Perform multi-point inspection (recommended) ❑ Rotate tires, inspect tires for wear and measure ❑ tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 24 Scheduled Maintenance 2008 (smg) Scheduled Maintenance Guide USA (fus)