2008 Ford Taurus Scheduled Maintenance Guide 3rd Printing - Page 28

NORMAL SCHEDULE TRUCKS, FULLSIZE VANS & SUVS 150,000 miles ❑ Change engine oil and replace oil filter ❑ Change Motorcraft Premium Gold Engine Coolant (see Exceptions on page 47 and Premium Gold Coolant Change Record on page 48) Replace cabin air filter (if equipped) Replace climate-controlled seat filter (if equipped) Replace engine air filter Replace fuel filter Change automatic transmission/transaxle fluid and filter (filter not required on CD4E). Vehicles equipped with the TorqShift transmission and the externally-mounted remote filter element, replace the automatic transmission fluid and the externally-mounted remote filter element (if equipped). Change transfer case fluid Replace wheel bearings (if non-sealed bearings) Replace drive belt(s) if not replaced in the last 100,000 miles Inspect steering linkage, suspension and, if equipped, driveshaft, ball joints and U-joints Inspect engine cooling system and hoses Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system. Inspect half shaft boots (if equipped) Inspect exhaust system and heat shields Inspect PCV valve for flow (3V engines) Lubricate ball joints and U-joints (if equipped with zerk fittings) Inspect and lubricate 4x4 front axle U-joints Perform multi-point inspection (recommended) Rotate tires, inspect tires for wear and measure tread depth (vehicles with dual rear wheels should only rotate if unusual wear is noted) Inspect wheels for end play and noise DEALER VALIDATION: RO#: DATE: P&A CODE: MILEAGE: 28 Scheduled Maintenance 2008 (smg) Scheduled Maintenance Guide USA (fus)