2010 Ford F250 Super Duty Super Cab Owner Guide 2nd Printing - Page 156

Locks and Security Replacing lost remote entry transmitters If you would like to have your remote entry transmitter reprogrammed because you lost one, or would like to buy additional remote entry transmitters, you can either reprogram them yourself, or take all remote entry transmitters to your authorized dealer for reprogramming. Note: If your vehicle is equipped with the memory seats/power mirrors/adjustable pedals feature, you can associate a remote entry transmitter to each memory position using this procedure. The first transmitter that is programmed will recall Driver 1 settings, and the second transmitter that is programmed will recall Driver 2 settings. How to program your remote entry transmitters You must have all remote keyless entry keypads and remote entry transmitters (maximum of four) available before beginning this procedure. Note: Do not press the brake pedal anytime during this sequencing, as doing so will invalidate the procedure. To reprogram the remote entry transmitters: 1. Ensure the vehicle is electronically unlocked. 2. Put the key in the ignition. 3. Cycle eight times rapidly (within 10 seconds) between the off position and on. Note: The eighth turn must end in the on position. The doors will lock, then unlock, to confirm that the programming mode has been activated. 4. Within 20 seconds press any button on the remote entry transmitter. Note: If more than 20 seconds have passed you will need to start the procedure over again. The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed. 5. Repeat Step 4 to program each additional remote entry transmitter. 6. Turn the ignition to the off position after you have finished programming all of the remote entry transmitters. Note: After 20 seconds, you will automatically exit the programming mode. The doors will lock, then unlock, to confirm that the programming mode has been exited. 156 2010 F-250/350/450/550 (f23) Owners Guide, 2nd Printing USA (fus)