2010 Ford Fusion Owner Guide 4th Printing - Page 82

Driver Controls Using speed controls The speed controls are located on the steering wheel. The following buttons work with speed control: - SET +: Press to set a speed or to increase or decrease the set speed. CNCL (Cancel)/RSM (Resume): Press to return cancel or resume a set speed. ON/OFF: Press to turn speed control on or off. The speed control system uses two indicator lights in the instrument cluster: • an amber indicator light which illuminates when the system is on, and • a green indicator light which illuminates when the system is engaged. Setting speed control To set speed control: 1. Press and release ON. 2. Accelerate to the desired speed. 3. Press and release SET +. 4. Take your foot off the accelerator pedal. 5. The green indicator light on the instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. Disengaging speed control To disengage speed control, tap the brake pedal or clutch pedal (if equipped) or press CNCL. Disengaging the speed control will not erase the previous set speed. Note: When you use the clutch pedal to disengage the speed control, the engine speed may briefly increase, this is normal. 82 2010 Fusion (fsn) Owners Guide, 4th Printing USA (fus)