2011 Ford Explorer Owner Guide 4th Printing - Page 155
2011 Ford Explorer Manual
Page 155 highlights
Locks and Security 8. Verify that the remote entry functions operate (press lock then unlock, making sure you end in unlock) and that the vehicle starts with new intelligent access key. If the intelligent access key has been successfully programmed, it can be used to activate the intelligent access with push button start feature and can be used to start your vehicle. Note: To program MyKey features, refer to MyKey in this chapter. PERIMETER ALARM SYSTEM (IF EQUIPPED) The perimeter alarm system will warn you in case of unauthorized entry to your vehicle. When the following types of unauthorized entry occur: • any door, the hood or the liftgate/trunk is opened without using the keypad, the remote entry transmitter or the intelligent access transmitter (if equipped), • or if the ignition is turned on with an invalid key, the perimeter alarm will flash the turn signal lamps and sound the horn up to a total of 10 times. ARMING THE SYSTEM The system is ready to arm whenever the ignition is off. To arm the system, do one of the following: • Press the control on the remote entry transmitter. Note: If you press the control twice on the remote entry transmitter within three seconds, the horn will chirp once to let you know that all doors, the hood and the liftgate/trunk are closed. If any of these are not closed, the horn will chirp twice to warn you that they are still open. while a • Press the driver or passenger interior door lock control front door is open, then close the door. • Lock the doors using the intelligent access (if equipped) method (press the lock area in either front door handle). • Press and hold the 7 • 8 and 9 • 0 controls together on the keyless entry pad to lock the doors (driver's door must be closed). 155 2011 Explorer (exp) Owners Guide, 4th Printing USA (fus)