2011 Ford Explorer Owner Guide 4th Printing - Page 87

Lights 5. Disconnect the electrical connector (1) from the lamp assembly. Disconnect the bulb socket (2) from the lamp assembly by squeezing the two tabs at the top and bottom of the socket. 2 1 6. Pull bulb straight out of socket and install the new bulb. 7. Install the bulb socket (2) by pushing it directly into the lamp assembly until the top and bottom tabs snap into place. Reconnect the electrical connector 8. Carefully install the tail lamp assembly on the vehicle by securing the lamp assembly with two bolts. Reinstall bolt covers. Replacing tail/brake lamp bulbs For bulb replacement, see your authorized dealer. Replacing fog lamp bulbs 1. Make sure the headlamp switch is off. 2. Remove the bulb socket from the fog lamp by turning it counterclockwise. 3. Disconnect the electrical connector. Reverse steps to reinstall bulb(s). 87 2011 Explorer (exp) Owners Guide, 4th Printing USA (fus)