2011 Ford Ranger Regular Cab Owner Guide 2nd Printing - Page 53

Driver Controls SPEED CONTROL (IF EQUIPPED) With speed control set, you can maintain a set speed without keeping your foot on the accelerator pedal. WARNING: Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved. Using speed control The speed controls are located on the steering wheel. The following buttons work with speed control: ON: Press to turn system on. OFF: Press to turn system off. RES (Resume): Press to resume a set speed. SET+: Press to set the speed or increase the set speed. CST- (Coast): Press to decrease the set speed. Setting speed control 1. Press and release ON. 2. Accelerate to the desired speed. 3. Press and release SET+. 4. Take your foot off the accelerator pedal. 5. The indicator light on the instrument cluster will turn on. Note: • Vehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. 53 2011 Ranger (ran) Owners Guide, 2nd Printing USA (fus)