2011 Ford Ranger Regular Cab Owner Guide 2nd Printing - Page 62

Locks and Security 1. Insert a previously programmed 4 coded key into the ignition. 3 2. Turn the ignition from the 2 5 (lock) position to the 4 (on) position. Keep the ignition in the 4 2 (on) position for at least one second, but no more than 10 seconds. 1 3. Turn the ignition to the 2 (lock) position, and remove the coded key from the ignition. 4. After three seconds but within 10 seconds of removing the previously programmed coded key, insert the other previously programmed coded key into the ignition. 5. Turn the ignition from the 2 (lock) position to the 4 (on) position. Keep the ignition in the 4 (on) position for at least one second but not more than 10 seconds. 6. Turn the ignition to the 2 (lock) position, and remove the second key from the ignition. 7. After three seconds but within 20 seconds of removing the previously programmed coded key, insert the unprogrammed key into the ignition. 8. Turn the ignition from the 2 (lock) position to the 4 (on) position. Keep the ignition in the 4 (on) position for at least one second. 9. Your new key is now programmed. If the key has been successfully programmed it will start the vehicle's engine and the theft indicator light will illuminate for three seconds and then go out. If the key was not successfully programmed, it will not start your vehicle's engine and the theft indicator light will flash on and off rapidly. If failure repeats, bring your vehicle to your authorized dealer to have the new key(s) programmed. To program additional new unprogrammed key(s), repeat this procedure from Step 1 for each additional key. 62 2011 Ranger (ran) Owners Guide, 2nd Printing USA (fus)