2011 Ford Ranger Super Cab Owner Guide 2nd Printing - Page 266
2011 Ford Ranger Super Cab Manual
Page 266 highlights
266 Item Fuel tank-SuperCab 1 Capacity 19.5 gallons (73.8L) - - Ford Part Name or Equivalent Ford Part Number / Ford Specification 2011 Ranger (ran) Owners Guide, 2nd Printing USA (fus) Maintenance and Specifications Add the coolant type originally equipped in your vehicle. Use of synthetic or synthetic blend motor oil is not mandatory. Engine oil need only have the API Certification mark and meet the requirements of Ford specification WSS-M2C929-A (4.0L) or WSS-M2C930-A (2.3L). 3 Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. 4 Automatic transmissions that require MERCON V should only use MERCON V fluid or fluid that is specified dual usage MERCON/MERCON V. Refer to scheduled maintenance to determine the correct service interval. Use of any fluid other than the recommended fluid may cause transmission damage. 5 Service refill capacity for the manual transmission is determined by filling the transmission to the bottom of the filler hole with the vehicle on a level surface. 6 Traction-Lok axles use 4.75-5.0 pints (2.2-2.4L) of rear axle lubricant. 7 Service refill capacities are determined by filling the rear axle 1/4 inch to 9/16 inch (6 mm to 14 mm) below the bottom of the filler hole. 8 Add 4 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford specification EST-M2C118-A for complete refill of Traction-Lok axles. 2