2011 Ford Ranger Super Cab Owner Guide 2nd Printing - Page 54

Driver Controls Disengaging speed control To disengage the speed control, press the brake pedal or the clutch pedal (if equipped). Disengaging the speed control will not erase the previous set speed. Note: When you use the clutch pedal to disengage the speed control, the engine speed may briefly increase, this is normal. Resuming a set speed Press and release RES. This will automatically return the vehicle to the previously set speed. Increasing speed while using speed control To set a higher speed: • Press and hold SET+ until you get to the desired speed, then release the control. You can also use SET+ to operate the tap-up function. Press and release SET+ to increase the set speed in 1 mph (1.6 km/h) increments. • Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed, press and release SET +. Reducing speed while using speed control To reduce a set speed: • Press and hold CST- until you get to the desired speed, then release the control. You can also use CST- to operate the tap-down function. Press and release the CST- to decrease the set speed in 1 mph (1.6 km/h) increments. • Press the brake pedal or the clutch pedal (if equipped) until the desired vehicle speed is reached, then press and release SET+. Turning off speed control To turn off the speed control, press OFF or turn off the ignition. Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. 54 2011 Ranger (ran) Owners Guide, 2nd Printing USA (fus)