2011 Ford Transit Connect Passenger Owner Guide 2nd Printing - Page 176
2011 Ford Transit Connect Passenger Manual
Page 176 highlights
Driving BRAKE-SHIFT INTERLOCK This vehicle is equipped with a brake-shift interlock feature that prevents the gearshift lever from being moved from P (Park) when the ignition is in the on position unless the brake pedal is pressed. If you cannot move the gearshift lever out of P (Park) with ignition in the on position and the brake pedal pressed, it is possible that a fuse has blown or the vehicle's brake lamps are not operating properly. Refer to Fuses and relays in the Roadside Emergencies chapter. If the fuse is not blown and the brake lamps are working properly, the following procedure will allow you to move the gearshift lever from P (Park): 1. Apply the parking brake, turn ignition key to off, then remove the key. 2. Using a flat head screwdriver, remove the plastic cover. 3. Insert the ignition key and push it straight down to release the interlock. 4. Apply the parking brake, then shift to N (Neutral). 5. Start the vehicle. Note: Starting the vehicle in N (Neutral) still requires following the steps in the Preparing to start your vehicle section. 6. To drive, with the brake pedal still pressed, release the parking brake and shift to D (Drive) or R (Reverse). See your authorized dealer as soon as possible if this procedure is used. WARNING: Do not drive your vehicle until you verify that the brake lamps are working. WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. 176 2011 Transit Connect (tst) Owners Guide, 2nd Printing USA (fus)