2013 Ford F150 Regular Cab F-150 Raptor Supplement Printing 1 - Page 37

Tire Information Optional bead-lock compatible wheel If your SVT vehicle is equipped with the optional bead lock compatible wheel, you have the ability to convert this wheel to use a true bead-lock ring, which allows operation at low tire pressures when off-road to minimize risk of de-beading the tire. See your local Ford Racing Parts Dealer for more information. Note: Converting the bead-lock compatible wheel to true bead-locks is for off-road use only. On road driving is not permitted. Note: SVT only recommends using bead-lock rings from Ford Racing, in conjunction with the OEM tire. Any other combination using this wheel could result in air loss or tire failure. OPERATING A PERFORMANCE VEHICLE AT HIGHER THAN NORMAL SPEEDS Your SVT vehicle is capable of operating at higher than normal off-road speeds and is equipped with tires rated for the vehicles' maximum speed. However, it is important to remember to always drive safely, obey all traffic laws and only operate your SVT vehicle at higher than normal speeds at locations and under conditions where such can be done safely. Also, before operating your vehicle at higher than normal speeds: • Make sure your tires are at the correct tire pressure. (see the Tires section of this supplement for more information). • Inspect wheels and tires for wear and damage. Replace any damaged wheels or tires. • Never operate the vehicle at higher than normal speeds when loaded with passengers/cargo. WINTER DRIVING The original equipment tires on your SVT vehicle are designed for maximum performance in all driving conditions. However, they are not designed to be used with snow chains. If you will be operating your vehicle with snow chains, use a smaller tire and wheel combination as recommended in the Owner's Manual 36 2013 F-150 (f12) Supplement, 1st Printing USA (fus)