2013 Ford F250 Super Duty Super Cab Diesel Supplement Printing 1 - Page 77

2013 Ford F250 Super Duty Super Cab Manual

Page 77 highlights

Scheduled Maintenance Normal Scheduled Maintenance1 At every oil change Change engine oil and filter.2 interval as indicated Refill diesel exhaust fluid tank. by the information Rotate tires3, inspect tire wear and measure tread display depth. Perform multi-point inspection (recommended). Inspect air filter restriction gauge. Replace filter if necessary. Inspect automatic transmission fluid level. Inspect brake pads, shoes, rotors, drums, brake linings, hoses and parking brake. Inspect engine and secondary coolant level and hoses. Inspect exhaust system and heat shields. Inspect front axle and U-joints. Lubricate if equipped with grease fittings (4WD vehicles). Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints. Lubricate if equipped with grease fittings. Inspect wheels and related components for abnormal noise, wear, looseness or drag. Do not exceed one year or 10000 miles (16000 kilometers) between service intervals. 2 Reset your Intelligent Oil-Life Monitor® after each engine oil and filter change. See the Information Display chapter of your Owner's Manual. 3 Vehicles equipped with dual rear wheels should rotate the front wheels when specified; rear wheels only if unusual wear is noted. Additional Maintenance Items1 Every 15000 miles Inspect engine and secondary cooling system (24000 km) concentration (freeze-point protection), additive (corrosion inhibitor) strength, coolant level and hoses.2 Every 22500 miles Replace engine- and frame-mounted fuel filters.3 (36000 km) 1 76 2013 Diesel (67l) Supplement, 1st Printing USA (fus)

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

Normal Scheduled Maintenance
1
At every oil change
interval as indicated
by the information
display
Change engine oil and filter.
2
Refill diesel exhaust fluid tank.
Rotate tires
3
, inspect tire wear and measure tread
depth.
Perform multi-point inspection (recommended).
Inspect air filter restriction gauge. Replace filter if
necessary.
Inspect automatic transmission fluid level.
Inspect brake pads, shoes, rotors, drums, brake
linings, hoses and parking brake.
Inspect engine and secondary coolant level and
hoses.
Inspect exhaust system and heat shields.
Inspect front axle and U-joints. Lubricate if equipped
with grease fittings (4WD vehicles).
Inspect steering linkage, ball joints, suspension,
tie-rod ends, driveshaft and U-joints. Lubricate if
equipped with grease fittings.
Inspect wheels and related components for abnormal
noise, wear, looseness or drag.
1
Do not exceed one year or 10000 miles (16000 kilometers) between
service intervals.
2
Reset your Intelligent Oil-Life Monitor® after each engine oil and filter
change. See the
Information Display
chapter of your
Owner’s Manual.
3
Vehicles equipped with dual rear wheels should rotate the front wheels
when specified; rear wheels only if unusual wear is noted.
Additional Maintenance Items
1
Every 15000 miles
(24000 km)
Inspect engine and secondary cooling system
concentration (freeze-point protection), additive
(corrosion inhibitor) strength, coolant level and
hoses.
2
Every 22500 miles
(36000 km)
Replace engine- and frame-mounted fuel filters.
3
Scheduled Maintenance
76
2013 Diesel
(67l)
Supplement, 1st Printing
USA
(fus)