2013 Ford Mustang Owner Manual Printing 3 - Page 241

240 Maintenance Checking and Adding Manual Transmission Fluid (if equipped) 1. Clean the filler plug. It is located on the passenger side of the transmission. 2. Remove the filler plug and inspect the fluid level. 3. For vehicles equipped with a V6 engine, the correct manual transmission fill level is at the lower edge of the filler hole. For vehicles equipped with a V8 engine, the correct manual transmission fill level is 1/2 in (1.3 cm) below the edge of the filler hole. 4. Add enough fluid through the filler opening to bring the fluid up to the recommended levels. 5. Install and tighten the fill plug securely. Use only fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. BRAKE AND CLUTCH FLUID CHECK Brake and clutch (if equipped) systems are supplied from the same reservoir. Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately. POWER STEERING FLUID CHECK Your vehicle is equipped with an electric power steering (EPS) system. There is no fluid reservoir to check or fill. FUEL FILTER Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. For Shelby fuel filter requirements, see the Shelby GT500 Supplement. 2013 05+ Mustang (197) Owners Guide gf, 3rd Printing USA (fus)