1996 GMC Yukon Owner's Manual - Page 149

00 (5): Press this button to reduce cassettetape noise. The double-D symbol will appear on the display while the player is in this mode. Dolby Noise Reduction is manufdctured under a license from Dolby Laboratories Licensing Corporation.Dolby and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. CLN: This message may appear on the display. If it does, your cassette tape player needs to be cleaned. It will still play tapes, but you should clean it as soon as possible to prevent damage to your tapes and player. See "Care of Your Cassette Tape Player" in the Index. After you clean the player, press and hold EJECT for five secondsto reset the CLN indicator. The radio will display --- to show the indicator was reset. FWD (6): Press this button to rapidly forward the tape to the end of the cassette reel or until you press FWD again. The radio will play the last selected station while forwarding the tape. The tape direction arrow will blink during FWD operation. CD Adapter Kits Although this is not a recommended practice, it is possible to use a CD adapter kit with your cassette tape player. The adapter kit cassette should begin playing like a regular audio cassette tape once inserted. If the cassette immediately ejects, turn the radio off, turn the ignition on and press and holdthe TAPE AUX button until the tape icon flashes on the display. Insert theadapter cassette again. It will power up the radio and begin playing. This override routine will remain active until the EJECT button is pressed. AM-FM: Press this button to switch from a tape to the radio. TAPE AUX: Press this button to return to the tape player. The lighted arrow will appear and show the direction of play when a tape is in the active mode. EJECT Press this button to remove the tape. The mdio will now play. EJECT can be used with either the ignition or radio off. To load a cassette tape with the ignition or radio off, press EJECT before loading the cassette. 3-17