2002 Honda CR-V Owner's Manual - Page 293

Lights 6. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 7. Reinstall the socket into the light assembly by turning it clockwise until it locks. 8. Test the lights to make sure the new bulb is working. 9. Align the clips on the taillight assembly with the holes in the body, then push the taillight assembly into place. Tighten the two mounting screws securely and reinstall the covers. Replacing a Rear License Plate Bulb 1. Place a cloth and insert a small flat-tipped screwdriver between the right edge of the lens and the housing. The lens will come down. 2. Pull the bulb straight out of its socket. Push the new bulb in until it bottoms in the socket. 3. Turn on the parking lights and check that the new bulb is working. 4. Put the lens back into the light assembly, left side first. Push on the right edge until it snaps into place. Maintenance 291