2003 Honda Accord Owner's Manual - Page 173

Audio System SCAN The SCAN function samples all the stations with strong signals on the selected band. To activate it, push and release the SCAN button on the driver's side of the audio display or touch the SCAN icon at the bottom of the display. You will see SCAN in the display. The system will scan up the band for a station with a strong signal. When it finds one, it will stop and play that station for approximately five seconds. If you do nothing, the system will then scan for the next strong station and play that for five seconds. When it plays a station that you want to continue listening to, press the SCAN button or touch the SCAN icon again. Preset You can store the frequencies of your favorite radio stations in the six preset icons. Each icon will store one frequency on the AM band, and two frequencies on the FM band. To store a frequency: 1. Push the AUDIO DISPLAY button to view the audio display. You will see the six preset icons. 2. Select the desired band, AM or FM. FM1 and FM2 let you store two frequencies with each preset icon. 3. Use the TUNE, SEEK, or SCAN function to tune the radio to a desired station. 4. Pick the preset icon you want for that station. Touch the icon, and hold it until you hear a beep. CONTINUED Comfort and Convenience Features 5. Repeat steps 2 to 4 to store a total of six stations on AM and twelve on FM. Once a station's frequency is stored, simply touch the proper preset icon to tune to it. The preset frequencies will be lost if your car's battery goes dead, is disconnected, or the radio fuse is removed. 171