2003 Honda Accord Owner's Manual - Page 322
2003 Honda Accord Manual
Page 322 highlights
Lights Replacing Rear Bulbs (in Trunk Lid) SOCKETS BULBS TRIM CLIPS SOCKETS BULBS 1. Open the trunk. 2. 6-cylinder models Remove the trim clips from the right or left corner of the trunk lid trim by carefully prying them using a small, flat-tip screwdriver wrapped with tape. 3. Carefully bend back the corner of the trunk lid trim to expose the bulbs. 4. Determine which of the two bulbs is burned out: taillight or back-up light. 7. Install the new bulb in the socket. 8. Reinstall the socket into the light assembly. 9. Test the lights to make sure the new bulb is working. 5. Remove the socket by turning it one-quarter turn counterclockwise. 10. Push the trunk lid trim back into position. 6. Remove the burned out bulb from 11. Press the trim clip back into its the socket by pulling it straight out hole. of its socket. 318 Maintenance