2004 Honda Accord Owner's Manual - Page 100

Power Windows To close the driver's window fully, pull back the window switch firmly, then release it. The window automatically goes all the way up. To stop the window from going all the way up, push down on the window switch briefly. To open or close the driver's window partially, push down or pull back on the window switch lightly and hold it. The window will stop when you release the switch. AUTO REVERSE If the driver's window runs into any obstacle while it is closing automatically, it will reverse direction and then stop. To close the window, remove the obstacle, then use the window switch again. Auto reverse stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it. If your vehicle's battery is disconnected or goes dead, or the driver's window fuse is removed, the AUTO function will be disabled. The power window system needs to be reset after reconnecting the battery or installing the fuse. 1. Start the engine. Push down and hold the driver's window switch until the window is fully open. 2. Pull and hold the driver's window switch to close the window completely, then hold the switch for a second or two more. If the power windows do not operate properly after resetting, have your vehicle checked by a Honda dealer. 100 Instruments and Controls