2013 Honda Odyssey Owner's Manual - Page 279

Compass * When you turn the ignition switch to ON (w , the compass self-calibrates, and the compass display appears. 1 Compass * Compass calibration can be affected under the following conditions: • Driving near power lines or stations • Crossing a bridge • Passing a large vehicle, or driving near a large object that can cause a magnetic disturbance • When accessories such as antennas and roof racks are mounted by magnets 1 Compass Calibration Calibrate the compass in an open area. Features While setting the compass: • The RETURN button returns to the previous screen. • The SETUP button cancels the setting mode. Compass Calibration If the compass indicates the wrong direction, or the compass display blinks, you need to manually calibrate the system. 1. Turn the ignition switch to ON (w . 2. Press and hold the SETUP button until the display shows the compass setting menu list. 3. Rotate to select Calibration, then press . 4. When the display changes to Start Calibration, press . 5. Drive the vehicle slowly in two circles. u The compass starts to show a direction after the calibration. The CAL indicator goes off. * Not available on all models 277