2014 Honda Accord 2014 Accord Sedan Owner's Manual - Page 560

uu Indicator, Coming On/Blinking u If the Malfunction Indicator Lamp Comes On or Blinks If the Malfunction Indicator Lamp Comes On or Blinks ■ Reasons for the indicator lamp to come on or blink • Comes on when there is a problem with the engine emissions control system, or the fuel fill cap is missing, or loose. • Blinks when engine misfiring is detected. ■ What to do when the indicator lamp comes on Avoid high speeds and immediately get your vehicle inspected at a dealer. ■ What to do when the indicator lamp blinks Park the vehicle in a safe place with no flammable items and wait at least ten minutes or more with the engine stopped until it cools. 1 If the Malfunction Indicator Lamp Comes On or Blinks NOTICE If you drive with the malfunction indicator lamp on, the emissions control system and the engine could be damaged. If the malfunction indicator lamp blinks again when restarting the engine, drive to the nearest dealer at 31 mph (50 km/h) or less. Have your vehicle inspected. Handling the Unexpected ■ Check/Tighten Fuel Cap Message ■ The message appears on when: An evaporative system leak is detected. This may be caused by the fuel fill cap being loose or not being installed. ■ What to do when the message appears: 1. Stop the engine. 2. Check if the fuel fill cap is fully installed. u If not, loosen the cap, and then retighten it until it clicks at least once. 3. Drive for several days of normal driving. u The message should go off. ■ When the malfunction indicator lamp comes on The malfunction indicator lamp comes on if the system continues to detect a leak of gasoline vapor. If this happens, check the fuel fill cap using the procedures described above. 559