2014 Honda Accord 2014 Accord Sedan Owner's Manual - Page 79

uu Indicators u Indicator Name ● On/Blinking Comes on for a few seconds when you turn the ignition switch to ON (w *1, then goes off. Comes on when you have customized FCW to turn off. Comes on if there is a problem with the FCW system. Blinks when the system detects a likely collision with a vehicle in front of you. The beeper sounds. ● ● Explanation Stays on constantly without FCW off - Have the vehicle checked by a dealer. Message*2 ● ● Instrument Panel Models with information display ● ● Blinks while driving - Take appropriate action to prevent a collision (apply the brakes, change lanes, etc.). - - All models Forward ● Comes on when the FCW Collision system shuts itself off. Warning (FCW) Indicator * Models with information display Stays on - The temperature inside the FCW system is too high. The system activates when the temperature inside the system cools down. 2 Automatic shutoff P. 458 - ● ● Stays on - The radar sensor or the area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth. Have your vehicle checked by a dealer if: Models with multi-information display The indicator and message stay on after you cleaned the radar sensor cover. Models with information display The indicator and message come back on after you cleaned the area around the camera. 2 Automatic shutoff P. 458 2 Automatic shutoff P. 458 - - 78 *1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch. *2:On the left: Models with information display On the right: Models with multi-information display * Not available on all models