2009 Hummer H3 Owner's Manual - Page 318
2009 Hummer H3 Manual
Page 318 highlights
5-82 Service and Appearance Care To store the jack tool bag and jack: 1. Return the tools to the jack tool bag. 2. Secure the tool bag to the jack by securely wrapping the straps around the jack. Then, slide the straps through the rings on the bag and secure. Spare Tire The vehicle, when new, had a fully-inflated spare tire. A spare tire may lose air over time, so check its inflation pressure regularly. See Inflation - Tire Pressure on page 5-51 and Loading the Vehicle on page 4-35 for information regarding proper tire inflation and loading your vehicle. For instruction on how to remove, install or store a spare tire, see Removing the Flat Tire and Installing the Spare Tire on page 5-72 and Storing a Flat or Spare Tire and Tools (H3) on page 5-78 or Storing a Flat or Spare Tire and Tools (H3T) on page 5-80. After installing the spare tire on your vehicle, you should stop as soon as possible and make sure the spare is correctly inflated. The spare tire does not have a Tire Pressure Monitor System sensor. You may get a low pressure warning light. See Tire Pressure Monitor Operation on page 5-54. Have the damaged or flat road tire repaired or replaced as soon as you can. Do not mix tires and wheels of different sizes, because they will not fit. Keep your spare tire and its wheel together. 3. Reinstall the wing nut retainer to fasten the jack and tool bag under the rear seat. Make sure that the wing nut passes through the tool bag and the jack before tightening it. 4. Turn the wing nut retainer clockwise to secure.