2009 Hummer H3x Owner's Manual - Page 153

Instrument Panel Engine Oil Life System With the engine off, turn the key to ON/RUN and then press the reset stem until OIL LIFE RESET appears - alternating between OIL LIFE and RESET - on the DIC display. The CHANGE OIL message alerts you to change the oil on a schedule consistent with your driving conditions. Always reset the OIL LIFE message after an oil change. To reset the message, see Engine Oil Life System on page 5-15. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Engine Oil on page 5-13 and Scheduled Maintenance on page 6-4 for more information. To set your choice for this feature: 1. With the engine off, turn the key to ON/RUN, but do not start the engine. 2. Close all doors so the DOORS message does not display in the DIC. 3. Momentarily press and release the reset stem until the current language is displayed: English (default), Spanish, or French. 4. To select a different language, press and hold the reset stem until the next language appears. 5. Repeat Step 4 until the desired language is displayed. Once the desired language is shown on the DIC display, the language is set. 6. To exit the language selection, momentarily press and release the reset stem. All DIC messages will now display in the language selected. 3-35 Automatic Door Locks This feature allows you to program the door locks to a preferred setting. To set your choice for this feature: 1. With the engine off, turn the key to LOCK/OFF. Do not remove the key from the ignition. 2. Press and hold the power door lock button until the DIC display shows the current door lock mode. 3. To view the next available mode, press and hold the reset stem until the mode appears. Release the reset stem and press and hold again to view the next mode. 4. Once the desired mode is shown on the DIC display, briefly press the reset stem to set your choice. The DIC display then clears. Language This feature allows you to choose the language in which the DIC display shows information.